© Eagle Ears Productions, LLC 2017

ELBO TOOL HOLLOWING SYSTEM STORE

Elbo Tool (Recommended for lathes with beds 33” or longer…shorter beds require the Elbo Lathe Extension) The Elbo Tool's innovative design eliminates the drudgery and physical exertion associated with end grain vessel hollowing. It is one of the easiest hollowing tools to setup taking less than one minute. Compact but powerful, it readily attaches to any lathe without retaining bars or special hardware. One end clamps to your lathe's tailstock quill while the cutting arm slides over your tool rest. Three elbow- joint pivot points let you guide the cutter effortlessly. No more tense muscles or bone jolting rides as you hollow. Pull the cutting arm out of the tool holder section and you can insert your favorite 3/4" round shafted hollowing tool. You can also purchase separate adapters to allow you to use other diameter round shafted cutter tools. Elbo Tool Available in Two Configurations! Complete Elbo Tool - includes: clamp assembly, 2 pivot arms, 14" long -  3/4" round cutting arm, and tool holder with 1/4" cutter. (Recommended for lathes with beds 33” or longer…shorter beds require the Elbo Lathe Extension)

$250.00

  NAKED Elbo Tool - The Elbo tool MINUS the 3/4" round cutting arm, and tool holder with 1/4" cutter. For those who already have 3/4" round boring bars from another hollowing system. (Recommended for lathes with beds 33” or longer…shorter beds require the Elbo Lathe Extension) $225.00    Elbo Lathe Extension for Short Bed and Mini Lathes Until now, it's been nearly impossible to find a hollowing system for a short bed or mini-lathe. Elbo Tool brings to market a mini-lathe extension enabling you to use the famous Elbo Tool on your mini-lathe. It also works for full size short bed lathes with swings up to 22 inches. The Lathe Extension bolts to the bed of your lathe and provides an adjustable barrel mounted on a vertical shaft. The Elbo Tool bolts to this barrel allowing you to adjust for level on your lathe. (Elbo Tool not included)

$65.00

Extra 3/4" x 14" Round Hollowing Arm Need an extra bar so you can keep you favorite cutters mounted? Spare ¾” x 14” round hollowing arm for the Elbo Tool. Can be ordered with or without cutter clamp, screw and square cutter.

$35-$50

 

Turner’s Laser Guide Ron Brown’s Turners Laser Guide enables you to know the location of your cutting edge in real time even while the vessel is spinning and material is being removed. It utilizes a laser pointer to indicate the cutter position on the outside of the vessel while the cutter is actually inside the vessel and is otherwise impossible to accurately locate. With the stainless steel supports you can turn vessels 10" deep by 20" in diameter. The Turners Laser Guide Includes:1 Laser Pointer, 1 Thickness Gauge, 1 Universal Mounting Base, 1 Upright Support Arm, 1 90° Bi-directional Bracket, 1 Laser Support Arm, 1 Height Stop Ring and 1 AAA Battery

$80.00

Bar Adapters Now you can use any of your favorite cutting bars. Adapters are available for  ⅜”, ½” and ⅝” round bars.

$20.00

     Replacement Square Bar Cutter  Replacement 1/4" x 1/4" x 2 1/2" High Speed tool steel NOW with 5% Cobalt for a longer lasting edge. (square cutter bar only [bar is not ground], clamp, screw and bar not included) Quantity discount below.

$6.00

 

1” Round Smoothing Cutter Use this round cutter to smooth out marks left from hollowing. Mounts on the Elbo bar  with provided screw. Made from Regual Tool Steel that takes a great burr and lasts a long time. Comes pre-ground. Quantity discount below.

$8.00

Hunter Carbide #2 Cutter Assembly This carbide cutter removes wood at an incredible rate and is easy to control. Designed to work with the Elbo Tool standard clamp this replaceable # 2 Hunter Tool Cutter gives you long tool life with outstanding finish cuts prior to any sanding operations. Simply remove the square Elbo cutter bar and insert the Hunter Tool Cutter in its place. Never needs sharpening, just rotate the tool slightly before each use. When the cutter eventually grows duller simply replace it with another cutter. $69.00
Hunter Carbide #2 Replacement Cutter This is a replacement carbide cutter for the Hunter #2 Cutter Assembly.

$20.50

      Hunter Carbide #2 Replacement Screw Small things, fumble fingers and wood shavings are not a great combination. This is a replacement screw for the Hunter #2 Cutter Assembly.

$4.00

Hunter Carbide #2 Replacement Wrench Put your Hunter Wrench down in a convenient place…that you can’t remember? Then you need the Hunter Carbide Replacement Wrench for the Hunter #2 Cutter Assembly.

$7.00

Quantity
Quantity
Sizes
.
© Eagle Ears Productions, LLC 2017

ELBO TOOL HOLLOWING

SYSTEM STORE

Elbo Tool (Recommended for lathes with beds 33” or longer…shorter beds require the Elbo Lathe Extension) The Elbo Tool's innovative design eliminates the drudgery and physical exertion associated with end grain vessel hollowing. It is one of the easiest hollowing tools to setup taking less than one minute. Compact but powerful, it readily attaches to any lathe without retaining bars or special hardware. One end clamps to your lathe's tailstock quill while the cutting arm slides over your tool rest. Three elbow-joint pivot points let you guide the cutter effortlessly. No more tense muscles or bone jolting rides as you hollow. Pull the cutting arm out of the tool holder section and you can insert your favorite 3/4" round shafted hollowing tool. You can also purchase separate adapters to allow you to use other diameter round shafted cutter tools. Elbo Tool Available in Two Configurations! Complete Elbo Tool - includes: clamp assembly, 2 pivot arms, 14" long -  3/4" round cutting arm, and tool holder with 1/4" cutter. (Recommended for lathes with beds 33” or longer…shorter beds require the Elbo Lathe Extension)

$250.00

  NAKED Elbo Tool - The Elbo tool MINUS the 3/4" round cutting arm, and tool holder with 1/4" cutter. For those who already have 3/4" round boring bars from another hollowing system. (Recommended for lathes with beds 33” or longer…shorter beds require the Elbo Lathe Extension) $225.00    Elbo Lathe Extension for Short Bed and Mini Lathes Until now, it's been nearly impossible to find a hollowing system for a short bed or mini-lathe. Elbo Tool brings to market a mini-lathe extension enabling you to use the famous Elbo Tool on your mini-lathe. It also works for full size short bed lathes with swings up to 22 inches. The Lathe Extension bolts to the bed of your lathe and provides an adjustable barrel mounted on a vertical shaft. The Elbo Tool bolts to this barrel allowing you to adjust for level on your lathe. (Elbo Tool not included)

$65.00

Extra 3/4" x 14" Round Hollowing Arm Need an extra bar so you can keep you favorite cutters mounted? Spare ¾” x 14” round hollowing arm for the Elbo Tool. Can be ordered with or without cutter clamp, screw and square cutter.

$35-$50

 

Turner’s Laser Guide Ron Brown’s Turners Laser Guide enables you to know the location of your cutting edge in real time even while the vessel is spinning and material is being removed. It utilizes a laser pointer to indicate the cutter position on the outside of the vessel while the cutter is actually inside the vessel and is otherwise impossible to accurately locate. With the stainless steel supports you can turn vessels 10" deep by 20" in diameter. The Turners Laser Guide Includes:1 Laser Pointer, 1 Thickness Gauge, 1 Universal Mounting Base, 1 Upright Support Arm, 1 90° Bi-directional Bracket, 1 Laser Support Arm, 1 Height Stop Ring and 1 AAA Battery

$80.00

Bar Adapters Now you can use any of your favorite cutting bars. Adapters are available for  ⅜”, ½” and ⅝” round bars.

$20.00

     Replacement Square Bar Cutter  Replacement 1/4" x 1/4" x 2 1/2" High Speed tool steel NOW with 5% Cobalt for a longer lasting edge. (square cutter bar only [bar is not ground], clamp, screw and bar not included) Quantity discount below.

$6.00

 

1” Round Smoothing Cutter Use this round cutter to smooth out marks left from hollowing. Mounts on the Elbo bar  with provided screw. Made from Regual Tool Steel that takes a great burr and lasts a long time. Comes pre-ground. Quantity discount below.

$8.00

Hunter Carbide #2 Cutter Assembly This carbide cutter removes wood at an incredible rate and is easy to control. Designed to work with the Elbo Tool standard clamp this replaceable # 2 Hunter Tool Cutter gives you long tool life with outstanding finish cuts prior to any sanding operations. Simply remove the square Elbo cutter bar and insert the Hunter Tool Cutter in its place. Never needs sharpening, just rotate the tool slightly before each use. When the cutter eventually grows duller simply replace it with another cutter. $69.00
Hunter Carbide #2 Replacement Cutter This is a replacement carbide cutter for the Hunter #2 Cutter Assembly.

$20.50

      Hunter Carbide #2 Replacement Screw Small things, fumble fingers and wood shavings are not a great combination. This is a replacement screw for the Hunter #2 Cutter Assembly.

$4.00

Hunter Carbide #2 Replacement Wrench Put your Hunter Wrench down in a convenient place…that you can’t remember? Then you need the Hunter Carbide Replacement Wrench for the Hunter #2 Cutter Assembly.

$7.00

.
Sizes
Quantity
Quantity