© Eagle Ears Productions, LLC 2018

ROBUST BOX TOOL REST FAQ

Compatible Lathe Models

These tool rests are designed to work with most lathes. Please read which models are supported below.

20”…24”…25” Lathes          

Box Rest - Long Post 1" diameter                          If you have a 20, 24 or 25” lathe such as the Robust American Beauty, Powermatic 3520 or 4224, Oneway 24”, Vicmarc VL 300 from Craft Supplies USA, General 20”, Rikon 20”, Woodfast 20” NOTE: Older American Made Powermatic 3520 and 4224 lathes use 1 1/8” posts. BACK

14”…16” Lathes

Box Rest – Standard Post 1" diameter                                       If you have a 14-16” lathe with 1” diameter post, such as the Robust Liberty, Robust Sweet 16, Robust Independence, Delta, General, Jet  or Rikon, these rests will probably fit: NOTE: 16” and 18” Grizzly, Laguna and similar imported lathes use 25mm posts, which are slightly smaller than 1”. BACK

12” Lathes

If you have a 12″ Lathe with 1″ diameter post, such as any of those made by Jet, Delta, General, Oneway, Rockwell or the Rikon Midi these rests should probably fit. NOTE: Older American Made Powermatic 45 and 90 lathes use 1 1/8” posts. BACK

Mini-Midi Lathes

Box Rest – Mini Lathe Post 5/8" or 16mm diameter                                         Most Mini and Midi lathes utilize tool rests with 5/8” diameter posts.  These rests will fit common lathes in this category including all Jet Mini and Midi lathes, all Delta Mini and Midi Lathes, the General Maxi Lathe, Rikon Mini, Grizzly, Nova Comet and others that use a 5/8 or 16mm post. NOTE: The Rikon Midi uses rests for 12” lathes with 1” posts. BACK
© Eagle Ears Productions, LLC 2018

ROBUST BOX TOOL REST FAQ

Compatible Lathe Models

These tool rests are designed to work with most lathes. Please read which models are supported below.

20”…24”…25” Lathes          

Box Rest - Long Post 1" diameter                          If you have a 20, 24 or 25” lathe such as the Robust American Beauty, Powermatic 3520 or 4224, Oneway 24”, Vicmarc VL 300 from Craft Supplies USA, General 20”, Rikon 20”, Woodfast 20” NOTE: Older American Made Powermatic 3520 and 4224 lathes use 1 1/8” posts. BACK

14”…16” Lathes

Box Rest – Standard Post 1" diameter                                       If you have a 14-16” lathe with 1” diameter post, such as the Robust Liberty, Robust Sweet 16, Robust Independence, Delta, General, Jet  or Rikon, these rests will probably fit: NOTE: 16” and 18” Grizzly, Laguna and similar imported lathes use 25mm posts, which are slightly smaller than 1”. BACK

12” Lathes

If you have a 12″ Lathe with 1″ diameter post, such as any of those made by Jet, Delta, General, Oneway, Rockwell or the Rikon Midi these rests should probably fit. NOTE: Older American Made Powermatic 45 and 90 lathes use 1 1/8” posts. BACK

Mini-Midi Lathes

Box Rest – Mini Lathe Post 5/8" or 16mm diameter                                         Most Mini and Midi lathes utilize tool rests with 5/8” diameter posts.  These rests will fit common lathes in this category including all Jet Mini and Midi lathes, all Delta Mini and Midi Lathes, the General Maxi Lathe, Rikon Mini, Grizzly, Nova Comet and others that use a 5/8 or 16mm post. NOTE: The Rikon Midi uses rests for 12” lathes with 1” posts. BACK